Detalle Productos Cat
14568151
Open Bowl Scrapers
36618117
627 Wheel Tractor-Scraper
Caterpillar
https://www.finanzauto.es/productos/mototraillas-de-caja-abierta-caterpillar-mototrailla-627
Metric
Imperial
Flywheel Power - Tractor/Scraper
304 kW (407 hp)/216 kW (290 hp)
Scraper Capacity - Heaped
18.4 m³
24 yd³
Top Speed - Loaded
53.9 km/h
33.5 mile/h
Availability
The principal choice for moving material on an earthmoving site is the Cat®627 Wheel Tractor-Scraper. Twin-powered for high rolling resistance and steep grades, this machine is engineered to work effectively in a wide range of conditions and materialtypes. Whether traveling through sand, clay, or shot rock, it\u2019s specifically designed to fit an earthmover\u2019s needs for today\u2018s andtomorrow\u2019s work.
Increased Comfort
Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day longImproved Productivity
Improvements in fuel efficiency and the new APECS transmission controls deliver more productivity in most applicationsAdditional Safety
New safety features help operators be more productive and work more efficiently all day longBE MORE PRODUCTIVE
WORK IN COMFORT
DESIGNED FOR SAFETY
EASY TO OPERATE
INTEGRATED CAT TECHNOLOGIES
EXECUTE EFFICIENCY
- The Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
- Use Ground Speed Control to set the desired top speed and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
- The Machine Speed Limit feature replaces Top Gear Selection.
- Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when the machine is working in a cold climate region.
- Enhance productivity through the usage of Cat Payload with
Sequence Assist. - Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.
- Reduce up to 14 individual operator commands per cycle with
Sequence Assist. - Steer with less effort with the newly designed high-pressure steering
system. - Enjoy interior improvements and a more ergonomic work environment
with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature control
.
- Enhance an operator’s awareness of site surroundings with the Work
Area Vision System (WAVS). - The seatbelt indicator provides visual and audible alerts when the seatbelt is not in use.
- The Advanced Cushion Hitch enables the cushion hitch to prevent endstroke by predicting endstroke events and controlling the rate of damping, resulting in reduced hitch maintenance and an improved operator ride in rough conditions.
- The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation. - Cat Advanced Ride Management (ARM) seat suspension reduces
endstroke movement of the load cylinder for a smoother ride. - Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine’s speed by canceling the throttle
command and engaging the engine compression brake.
- Monitor, manage, and enhance job site operations.
- Hit target grade faster and more accurately with Cat Grade technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Product Link™ collects machine data that can be viewed online
through web and mobile applications (optional attachment). - Access information anytime, anywhere with VisionLink® – use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your
jobsite. - Shorten the learning curve for inexperienced operators with
Sequence Assist and Load Assist (included with Cat Grade attachment).
- The tractor's hydraulic on-demand fan helps reduce fuel consumption.
- The Cat C13 tractor engine and C9.3 scraper engine meet U.S. EPA
Tier 4 Final and EU Stage V emission standards, or U.S. EPA Tier 2/
equivalent to U.S. EPA Tier 3 and EU Stage IIIA emission standards,
contributing to lower fuel consumption. - Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
- Cat Grade (optional attachment) intelligently ensures the machine
does not cut below grade in a cut area or overfill in the fill area.
Tractor Engine
| Flywheel Power - Tractor/Scraper | 304 kW (407 hp)/216 kW (290 hp) |
Scraper Bowl
| Scraper Capacity - Heaped | 18.4 m³ | 24 yd³ |
Transmission
| Top Speed - Loaded | 53.9 km/h | 33.5 mile/h |
Engine
| Engine Model - Tractor | Cat® C13 | |
| Engine Model - Scraper | Cat® C9.3 | |
| Note (1) | Cat® C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III. | |
| Note (2) | Cat® C9.3 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III. | |
| Rated Engine RPM - Tractor | 2000 r/min | 2000 r/min |
| Flywheel Power - Tractor | 304 kW | 407 hp |
| Rated Engine RPM - Scraper | 2150 r/min | 2150 r/min |
| Flywheel Power - Scraper | 216 kW | 290 hp |
General
| Scraper Capacity - Struck | 13 m³ | 17.1 yd³ |
| Scraper Capacity - Heaped | 18.4 m³ | 24 yd³ |
| Width - Cut | 3.14 m | 10.3 ft |
| Maximum Depth of Cut | 315 mm | 12.4 in |
| Maximum Depth of Spread | 540 mm | 21.3 in |
| Top Speed - Loaded | 53.9 km/h | 33.5 mile/h |
| Rated Load | 26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons) | |
| Overall Width | 3.57 m | 11.71 ft |
| Overall Shipping Height | 4.03 m | 13.22 ft |
| Tires - Tractor Drive | 33.25R29**E3 | |
| Tires - Scraper | 33.25R29**E3 | |
| 180° Curb-to-Curb Turning Width | 11.8 m | 38.71 ft |
| Fuel Tank Refill Capacity - Scraper | 1272 l | 336 gal (US) |
Dimensions
| Width - Overall Machine | 3585 mm | 141.1 in |
| Width - Tractor | 3381 mm | 133.1 in |
| Width - Inside of Bowl | 3048 mm | 120 in |
| Width - Outside Rear Tires | 3275 mm | 128.9 in |
| Height - Overall Shipping | 4029 mm | 158.6 in |
| Height - Top of Cab | 3621 mm | 142.6 in |
| Ground Clearance - Tractor | 557 mm | 21.9 in |
| Front of Tractor to Front Axle | 3119 mm | 122.8 in |
| Axle to Vertical Hitch Pin | 540 mm | 21.3 in |
| Height - Scraper Blade Maximum | 520 mm | 20.5 in |
| Wheel Base | 7998 mm | 314.9 in |
| Rear Axle - Rear of Machine | 2898 mm | 114.1 in |
| Width - Overall Machine - Ladder Down | 3790 mm | 149.2 in |
| Width - Rear Tire Centers | 2290 mm | 90.2 in |
| Length - Overall Machine - Standard | 14015 mm | 551.8 in |
| Length - Maximum (Push-Pull) | 15576 mm | 613.2 in |
Travel Speeds - Runout
| Transmission Gear - First | 5 km/h | 3.1 mile/h |
| Transmission Gear - Second | 8.9 km/h | 5.5 mile/h |
| Transmission Gear - Third | 12.1 km/h | 7.5 mile/h |
| Transmission Gear - Fourth | 16.3 km/h | 10.1 mile/h |
| Transmission Gear - Fifth | 21.9 km/h | 13.6 mile/h |
| Transmission Gear - Sixth | 29.6 km/h | 18.4 mile/h |
| Transmission Gear - Seventh | 39.9 km/h | 24.8 mile/h |
| Transmission Gear - Eighth | 53.9 km/h | 33.5 mile/h |
| Transmission Gear - Reverse | 9.2 km/h | 5.7 mile/h |
Service Refill Capacities
| Crankcase - Tractor | 30.58 l | 8.08 gal (US) |
| Transmission System - Tractor | 93 l | 24.76 gal (US) |
| Cooling System - Tractor | 45 l | 11.89 gal (US) |
| Diesel Exhaust Fluid - Tractor | 30.5 l | 8.1 gal (US) |
| Fuel Tank | 1272 l | 336.03 gal (US) |
| Hydraulic System | 83 l | 21.926 gal (US) |
| Crankcase - Scraper | 28 l | 7.397 gal (US) |
| Transmission System - Scraper | 49 l | 12.944 gal (US) |
| Cooling System - Scraper | 61 l | 16.114 gal (US) |
| Brake Cooling (Scraper) | 33 l | 8.7 gal (US) |
| Diesel Exhaust Fluid - Scraper | 22 l | 5.8 gal (US) |
| Note | *When equipped |
Service Refill Capacities - Tractor
| Differential | 158 l | 41.7 gal (US) |
| Final Drive - Each | 19 l | 5 gal (US) |
Service Refill Capacities - Scraper
| Differential | 34 l | 8.98 gal (US) |
| Final Drive - Each | 19 l | 5 gal (US) |
Non Push-Pull
| Overall Length | 14.02 m | 45.9 ft |
| Operating Weight - Empty | 40913 kg | 90213 lb |
Push-Pull
| Overall Length - With Bail Down | 15.58 m | 51.1 ft |
| Operating Weight - Empty | 42168 kg | 92980 lb |
Cab
| Exterior Sound Level | The exterior sound power level for the standard machine (ISO 6393) is 119 dB(A). |
| ROPS/FOPS | Meets ISO standards |
Safety Criteria Compliance Standards
| Rollover Protection Structure (ROPS) | ISO 3471:2008 for up to 17 084 kg (37,664 lb) |
| Falling Object Protective Structure (FOPS) | ISO 3449:2005 Level II |
| Brakes | ISO 3450:2011 |
| Steering System | ISO 5010:2007 |
| Seat Belt | SAE J386:JUN1985 |
| Reverse Alarm | ISO 9533:2010 |
| Notes | *If equipped with optional secondary steering |
Implement Cycle Times
| Bowl Raise | 3 s | 3 s |
| Apron Raise | 2.95 s | 2.95 s |
| Ejector Extend | 5.2 s | 5.2 s |
| Bail Raise | 1.8 s | 1.8 s |
| Ejector Retract | 6.7 s | 6.7 s |
| Bail Lower | 3.2 s | 3.2 s |
| Apron Lower | 3.8 s | 3.8 s |
| Bowl Lower | 3.5 s | 3.5 s |
You might also be interested in:
-
>
-
621
Flywheel Power - Tractor/Scraper
304 kW (407 hp)
Scraper Capacity - Heaped
18.4 m³
24 yd³
Top Speed - Loaded
53.9 km/h
33.5 mile/h
Caterpillar
15198578
>
-
631
Flywheel Power - Tractor/Scraper
425 kW
570 hp
Scraper Capacity - Heaped
26 m³
34 yd³
Top Speed - Loaded
55.8 km/h
34.7 mile/h
Caterpillar
36618331
>
-
637
Flywheel Power - Tractor/Scraper
425 kW
570 hp
Scraper Capacity - Heaped
26 m³
34 yd³
Top Speed - Loaded
55.8 km/h
34.7 mile/h
Caterpillar
36618497
>
-
651
Tractor Engine
Cat® C18
Flywheel Power - Tractor/Scraper
469kW (629 hp)
Scraper Capacity - Heaped
33.6 m³
44 yd³
Caterpillar
27725040
>
-
657
Tractor Engine
Cat® C18
Flywheel Power - Tractor/Scraper
469kW (637 hp) / 353 kW (479 hp)
Scraper Engine
Cat® C15
Caterpillar
27725042
360º Interior
360º Exterior
627 Wheel Tractor-Scraper
Call us
I am interested
I am interested
Thank you for contacting us.
We have received your request and will contact you as soon as possible.
Please check your email to ensure that the form has been sent correctly.