Detalle Productos Cat
14568151
Open Bowl Scrapers
36618331
631 Wheel Tractor-Scraper
Caterpillar
https://www.finanzauto.es/productos/mototraillas-de-caja-abierta-caterpillar-mototrailla-631
Metric
Imperial
Flywheel Power - Tractor/Scraper
425 kW
570 hp
Scraper Capacity - Heaped
26 m³
34 yd³
Top Speed - Loaded
55.8 km/h
34.7 mile/h
Availability
Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.
Increased Comfort
Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day longImproved Productivity
Improvements in fuel efficiency and the new APECS transmission controls deliver more productivity in most applicationsAdditional Safety
New safety features help operators be more productive and work more efficiently all day longBe More Productive
Work in comfort
Designed for Safety
Easy to Operate
Integrated Cat Technologies
Execute Efficiency
- The Advanced Productivity Electronic Control System (APECS) allows
the engine and transmission to communicate on a high level. This
communication allows the machine to utilize better the power
and torque the engine is producing. The net result is moving more
material. - Use Ground Speed Control to set the desired top speed and the machine will find the gear that works best for the engine and the
transmission, providing a lower fuel burn. - The machine speed limit feature allows the machine to maintain a
set top speed instead of relying on top gear selector. - Auto-Stall assists in quickly bringing the transmission to an
operating temperature at start-up when the machine is working in a cold climate region. - Cat® Payload for scrapers is an earthmoving solution for optimal payload and jobsite efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator
effort. - Enhance productivity through the usage of Cat Payload with
Sequence Assist.
- Reduce up to 14 individual operator commands per cycle with Sequence Assist.
- Steer with less effort using the newly designed high-pressure steering system.
- Enjoy interior improvements and a more ergonomic work
environment with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature control.
Enhance an operator’s awareness of site surroundings with the work area vision system (WAVS).- Get in and out of the cab easier with the new powered access ladder system (optional attachment).
- Seat belt indicator provides visual and audible alerts when the seatbelt is not in use.
- Advanced Cushion Hitch allows the cushion hitch to prevent endstroke by predicting endstroke events and managing the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
- The fuel fill, fuel filter, engine oil filter, engine oil change, and water drain are easily accessible at ground level.
- The spacious cab features easy, intuitive controls and excellent visibility
. The cab provides a comfortable working environment for all-day
operation.
Cat advanced ride management (ARM) seat suspension reduces end
stroke movement of the load cylinder for a smoother ride.
Engine overspeed protection will automatically engage with no operator
input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.
- Monitor, manage, and enhance jobsite operations.
- Hit the target grade faster and more accurately with Cat Grade technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
- Access information anytime, anywhere with VisionLink® – use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your
jobsite. - Shorten the learning curve for inexperienced operators with
Sequence Assist and Load Assist (included with Cat Grade
attachment).
- The new tractor hydraulic on -demand fan helps assist in lower fuel consumption.
- Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
- Cat Grade (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Tractor Engine
| Flywheel Power - Tractor/Scraper | 425 kW | 570 hp |
Scraper Bowl
| Scraper Capacity - Heaped | 26 m³ | 34 yd³ |
Transmission
| Top Speed - Loaded | 55.8 km/h | 34.7 mile/h |
Engine
| Emissions | Cat® C18 engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. | |
| Engine Model - Tractor | Cat® C18 | |
| Rated Engine RPM - Tractor | 1900 r/min | 1900 r/min |
| Flywheel Power - Tractor | 425 kW | 570 hp |
Travel Speeds - Runout
| Transmission Gear - First | 5.5 km/h | 3.4 mile/h |
| Transmission Gear - Second | 10 km/h | 6.2 mile/h |
| Transmission Gear - Third | 12.4 km/h | 7.7 mile/h |
| Transmission Gear - Fourth | 16.9 km/h | 10.5 mile/h |
| Transmission Gear - Fifth | 22.7 km/h | 14.1 mile/h |
| Transmission Gear - Sixth | 30.6 km/h | 19 mile/h |
| Transmission Gear - Seventh | 41.4 km/h | 25.7 mile/h |
| Transmission Gear - Eighth | 55.8 km/h | 34.7 mile/h |
| Transmission Gear - Reverse | 9.9 km/h | 6.2 mile/h |
General
| Overall Width | 3.94 m | 12.11 ft |
| Overall Shipping Height | 3.89 m | 12.9 ft |
| Scraper Capacity - Struck | 18.3 m³ | 24 yd³ |
| Scraper Capacity - Heaped | 26 m³ | 34 yd³ |
| Rated Load | 37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons) | |
| Width - Cut | 3.51 m | 17.7 ft |
| Maximum Depth of Cut | 450 mm | 12.4 in |
| Maximum Depth of Spread | 535 mm | 21.1 in |
| Top Speed - Loaded | 55.8 km/h | 34.7 mile/h |
| 180° Curb-to-Curb Turning Width | 12.23 m | 40.12 ft |
| Tires - Scraper | 37.25R35**E3 | |
| Tires - Tractor | 37.25R35**E3 | |
| Fuel Tank Refill Capacity - Scraper | 874 l | 231 gal (US) |
Service Refill Capacities
| Real Wheels (Each) | 9 l | 2.37 gal (US) |
| Crankcase - Tractor | 52 l | 13.7 gal (US) |
| Transmission System | 110 l | 29 gal (US) |
| Cooling System | 71 l | 18.75 gal (US) |
| Fuel Tank | 874 l | 231 gal (US) |
| Hydraulic System | 142 l | 37.5 gal (US) |
| Diesel Exhaust Fluid (DEF) | 30.5 l | 8 gal (US) |
Service Refill Capacities - Tractor
| Windshield Washer Reservoir | 5 l | 1.3 gal (US) |
| Differential | 153 l | 40.41 gal (US) |
Service Refill Capacities - Scraper
| Final Drive - Each | 33 l | 8.71 gal (US) |
Dimensions
| Width - Overall Machine | 3937 mm | 155 in |
| Width - Overall Machine - Ladder Down | 4045 mm | 159.3 in |
| Width - Tractor | 3662 mm | 144.2 in |
| Width - Rear Tire Centers | 2462 mm | 96.9 in |
| Width - Inside of Bowl | 3404 mm | 134 in |
| Width - Outside Bowl - Shipping Width | 3635 mm | 143.1 in |
| Height - Overall Shipping | 3892 mm | 153.2 in |
| Height - Top of Cab | 3805 mm | 149.8 in |
| Front of Tractor to Front Axle | 3608 mm | 142 in |
| Ground Clearance - Tractor | 664 mm | 26.1 in |
| Axle to Vertical Hitch Pin | 509 mm | 20 in |
| Height - Scraper Blade Maximum | 510 mm | 20 in |
| Wheel Base | 8808 mm | 346.8 in |
| Length - Overall Machine - Standard | 15160 mm | 596.8 in |
| Length - Maximum (Push-Pull) | 16643 mm | 655.2 in |
| Rear Axle - Rear of Machine | 2744 mm | 108 in |
| Width - Outside Rear Tires | 3636 mm | 143.2 in |
Non Push-Pull
| Overall Length | 15.04 m | 49.34 ft |
| Operating Weight - Empty | 46600 kg | 102750 lb |
Push-Pull
| Operating Weight - Empty | 48275 kg | 106430 lb |
| Overall Length - With Bail Down | 16.64 m | 54.59 ft |
Cab
| Exterior Sound Level | The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A). |
| ROPS/FOPS | ROPS/FOPS meet “ISO Standards.” |
Safety Criteria Compliance Standards
| Steering System | ISO 5010:2007 |
| Falling Object Protective Structure (FOPS) | ISO 3449:2005 Level II |
| Rollover Protection Structure (ROPS) | ISO 3471:2008 for up to 21 282 kg (46,919 lb) |
| Seat Belt | SAE J386:FEB2006 |
| Reverse Alarm | ISO 9533:2010 |
| Brakes | ISO 3450:2011 |
Implement Cycle Times
| Bowl Raise | 3.5 s | 3.5 s |
| Bowl Lower | 3.5 s | 3.5 s |
| Apron Raise | 4 s | 4 s |
| Apron Lower | 3.8 s | 3.8 s |
| Ejector Extend | 8.5 s | 8.5 s |
| Ejector Retract | 8.5 s | 8.5 s |
| Bail Raise | 1.5 s | 1.5 s |
| Bail Lower | 2.1 s | 2.1 s |
You might also be interested in:
-
>
-
621
Flywheel Power - Tractor/Scraper
304 kW (407 hp)
Scraper Capacity - Heaped
18.4 m³
24 yd³
Top Speed - Loaded
53.9 km/h
33.5 mile/h
Caterpillar
15198578
>
-
627
Flywheel Power - Tractor/Scraper
304 kW (407 hp)/216 kW (290 hp)
Scraper Capacity - Heaped
18.4 m³
24 yd³
Top Speed - Loaded
53.9 km/h
33.5 mile/h
Caterpillar
36618117
>
-
637
Flywheel Power - Tractor/Scraper
425 kW
570 hp
Scraper Capacity - Heaped
26 m³
34 yd³
Top Speed - Loaded
55.8 km/h
34.7 mile/h
Caterpillar
36618497
>
-
651
Tractor Engine
Cat® C18
Flywheel Power - Tractor/Scraper
469kW (629 hp)
Scraper Capacity - Heaped
33.6 m³
44 yd³
Caterpillar
27725040
>
-
657
Tractor Engine
Cat® C18
Flywheel Power - Tractor/Scraper
469kW (637 hp) / 353 kW (479 hp)
Scraper Engine
Cat® C15
Caterpillar
27725042
360º Interior
360º Exterior
631 Wheel Tractor-Scraper
Call us
I am interested
I am interested
Thank you for contacting us.
We have received your request and will contact you as soon as possible.
Please check your email to ensure that the form has been sent correctly.