Esta web utiliza 'cookies' propias y de terceros para ofrecerte una mejor experiencia y servicio. Al navegar o utilizar nuestros servicios, aceptas el uso que hacemos de ellas. Puedes cambiar la configuración de 'cookies' en cualquier momento.

Seleccionar categoría

910 Compact Wheel Loader

Solicitar información sobre este producto

Descripción

The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Solicitar presupuesto

Foto del 910 Compact Wheel Loader
Unidades:
Engine
Maximum Gross Power110HP82kW
Operating Weight18102lb8109kg
Bucket Capacities1.3-1.9 m3 (1.7-2.5 yd3)
ROPSISO 3471:2008
FOPSEN ISO 3449:2008 (ISO 3449:2005)
Cooling System5.7gal (US)21.5l
Fuel Tank43.6gal (US)165l
RearOscillating ?11 degrees; Locking differential (Standard)
FrontFixed; Locking differential (standard)
Note (4)*The measurements were conducted with the cab doors and windows closed.
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)Other tire choices are available. Contact your Cat dealer for details.
Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Standard Size15.5 R25 L2 XTLA
Note (2)In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Forward and Reverse - Speed Range 1*6.3mile/h10km/h
Forward and Reverse - Speed Range 2*12.5mile/h20km/h
Forward and Reverse - Speed Range 325mile/h40km/h
Note*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Diesel Exhaust Fluid (DEF) Tank4.8gal (US)18l
Engine Crankcase2.6gal (US)10l
Axles - Rear Center Differential2gal (US)7.5l
Axles - Front Center Differential2gal (US)7.5l
NoteDEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission0.8gal (US)3.2l
Hydraulic Tank14.5gal (US)55l
Hydraulic System - Including Tank25.9gal (US)98l
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level3.7s3.7s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow24gal/min90l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow24gal/min90l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure3046psi21000kPa
Maximum Flow - Implement Pump32gal/min122l/min
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift5.2s5.2s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure3046psi21000kPa
Hydraulic Cycle Time - Rackback2.2s2.2s
Relief Pressure - Tilt Cylinder4931psi34000kPa
Maximum Working Pressure - Implement Pump3408psi23500kPa
Hydraulic Cycle Time - Total Cycle Time12.5s12.5s
Hydraulic Cycle Time - Dump, at Maximum Reach1.4s1.4s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.75turns3.75turns
Maximum Flow - Steering Pump17gal/min66l/min
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed3.2s3.2s
Steering Articulation Angle - Each Direction40°40°
Maximum Working Pressure - Steering Pump2683psi18500kPa
Bucket Capacities - Light Material2.5-3.5 m? (3.3-4.6 yd?)
Bucket Capacities - General Purpose1.3-1.9 m? (1.7-2.5 yd?)
EmissionsEngine meets Tier 4 Final/Stage V emission standards.
Maximum Gross Power - ISO 14396 (DIN)111HP82kW
Displacement220in?3.6l
Maximum Net Torque - SAE J1349329ft?lbf446N?m
Rated Net Power - SAE J134999HP74kW
NoteNet power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - Rated Engine Speed2200r/min2200r/min
Maximum Gross Power - ISO 14396110HP82kW
Engine ModelCat C3.6
Stroke4.72in120mm
Rated Net Power - ISO 9249 (DIN)99HP73kW
Rated Net Power - ISO 924998HP73kW
Maximum Gross Torque - ISO 14396332ft?lbf450N?m
Maximum Gross Torque - SAE J1995335ft?lbf454N?m
Maximum Gross Power - SAE J1995111HP83kW
Maximum Net Torque - ISO 9249327ft?lbf443N?m
Maximum Gross Power - Maximum Engine Speed2350r/min2350r/min
Bore3.86in98mm