Material Handlers Cat MH3032 - Tier 4 / Stage V

Machine Setup Simplification

At the touch of fingertips and navigating user-friendly icons, the latest operator oriented User Interface (UI) maximizes uptime and gets crews to work without delay. From re-ordering work tool lists to creating new work tool combinations as needed, operators can quickly set up machines and easily access information.
The interface allows operators to maintain accuracy and makes the most of every second of their shift. Adding the ability to input couplers and attachments into the system makes setting up work tool combinations highly efficient by significantly reducing calibration time. It also eliminates the need to measure up again when changing Cat^® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.

Cat Payload*

Cat Payload provides operators with on-the-go weighing to help them hit load targets and avoid overloading, underloading, or misloading materials. Combine Payload with VisionLink^® Productivity** to analyze jobsites and individual assets for remote management of production targets and key metrics.

Swing Assist

Swing Assist automatically stops machine swing at operator-defined preset points. Simply swing to the desired stopping point and activate using the machine monitor or a preset joystick button. As you get closer, the machine will automatically decelerate and not allow swing past the set point. Swing Assist helps you hit more repetitive swing targets to help reduce fuel use and improve cycle times.

*Payload technologies are not legal for trade.
**VisionLink^® subscription required.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 07E

The C7.1 engine can run on biodiesel up to B20 and meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 and Korea Tier 4 Final emission standards with an aftertreatment system that requires no maintenance or downtime.
Match the machine to the job with three power modes - Power, Smart, and Eco. Smart mode automatically matches engine and hydraulic power to working conditions, helping provide maximum power when needed and reducing power when it isn't to save fuel.
The advanced electro-hydraulic system helps provide the optimum balance of power and efficiency while giving you the control you need.
Available SmartBoom™ lets the boom freely travel up and down without using any pump flow so operators can focus on stick and bucket work.
Valve priority helps put hydraulic pressure and flow where you need it.
Program and store your preferred power mode and joystick settings using your Operator ID. The machine will automatically remember your selections.

Cat Payload helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material--with a bucket and thumb combination or grapple and clamshell attachments--and get a real-time weight estimate without swinging.
Combine Cat Payload with VisionLink^® and remotely manage your production targets.
VisionLink^® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer. *Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
Swing Assist automatically stops machine swing at operator-defined preset points. Simply swing to the desired stopping point and activate using the machine monitor or a preset joystick button. As you get closer, the machine will automatically decelerate and not allow swing past the set point. Swing Assist helps you hit more repetitive swing targets to help reduce fuel use and improve cycle times.
Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.
Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.

*Data field availability can vary by equipment manufacturer.

Choose between a deluxe and premium cab. Both provide a comfortable, ergonomic work environment.
The cab has a wide seat that adjusts for operators of all sizes.
Get in and out of the cab easier using the tilt-up left console.
Control the machine comfortably with easy-to-reach controls all located in front of you.
Standard automatic climate control keeps you at the right temperature all shift long.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
Connect to personal devices via the standard radio’s USB ports and Bluetooth^® technology.
Optional auxiliary relay powers on and turns off CB radios, beacon lights, and other attachments without you taking your hands off the joysticks.
Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format.
Productivity applications are displayed in grid view to read on the go, and touchscreen navigation is programmed to ensure job performance continues without any hold-ups.

Count on your machine to withstand wear throughout the years. Boom, sticks, and other high-stress areas are reinforced with thick multi-plate fabrications, castings, and forgings to help ensure quality and reliability.
The upper frame uses specially designed mountings to support the heavy-duty cab and the lower frame is reinforced to help enhance component durability.
Work up to 3000 m (9,840 ft) above sea level without de-rating.
Don’t let the temperature stop you from working. The machine has a standard cold start capability of -18° C (0°F).
Auto warm up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
Standard autolube simplifies maintenance by automatically keeping the machine greased from the swing bearing and cab riser to the stick end.
An optional 20 kW generator allows for magnet operation. Generator controls are fully integrated into the cab monitor.
Expand your work capabilities with attachments for a variety of applications.

Track your machine's filter life and maintenance intervals via the in-cab monitor.
Scheduled Oil Sampling (S•O•S^SM) ports are located at ground level, helping simplify maintenance and allowing for quick, easy extraction of fluid samples for analysis.
The long life of the air intake filter with pre-cleaner helps save on maintenance costs.
The hydraulic oil filter helps provide high filtration performance, anti-drain valves to help keep oil clean when the filter is replaced, and long life with a 3,000-hour replacement interval.
High-efficiency cooling fans run only when needed; you can program intervals so they automatically reverse to help keep cores clean without interrupting your work.
Boost productivity with proactive service reminders. The integrated vehicle health management system alerts the operator with step-by-step service guidance and the parts needed to help reduce unnecessary downtime.

Cab Avoidance helps you avoid contact between your worktool attachment and the cab.
Standard 2D E-fence prevents your machine from moving outside operator-defined parameters.
Ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
Keep your machine secure with Operator ID. Use your PIN code on the monitor to enable the push-button starting feature.
Enjoy great all-around visibility with the help of small cab pillars, large windows, and a flat engine hood design. Rearview and side-view cameras are standard.
Standard 1800-lumen LED exterior lights illuminate your surroundings for a safer work environment.
Thick impact-resistant windshields fulfill P5A standards.
Service platform design provides easy, safe, and quick access to the upper service platform. The service platform steps use an anti-skid punch plate to help prevent slipping.
The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
Optional Operator Protective Guards (OPG) protect from falling and flying debris.
In an emergency, lower the cab safely with the emergency cab lowering valve behind the cab riser or to the right of the seat. The valve located behind the cab riser is easily accessible.
Boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose pressure.
Make service work more accessible and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine pump, battery, and radiator compartments to enhance visibility.

The Cat^® C7.1 diesel engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Cat^® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards such as traffic - not only helping keep personnel safe and helps avoid repairs, downtime, and costly job site fines.
Extended maintenance intervals help reduce downtime and decrease the amount of fluid and filters that are replaced over the machine's life.
VisionLink^® displays the CO₂ emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Remote Flash helps minimize downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Remote Troubleshoot helps decrease maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Engine Model	Cat® C7.1
Net Power - ISO 9249	150 kW	201 hp
Net Power - ISO 9249 (DIN)	204 hp (metric)	204 hp (metric)
Engine Power - Maximum - ISO 14396	151 kW	202 hp
Engine Power - ISO 14396 (DIN)	205 hp (metric)	205 hp (metric)
Bore	105 mm	4.1 in
Stroke	135 mm	5.3 in
Displacement	7 l	428 in³
Note (1)	Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	Net power advertised is the power available at the flywheel when engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed.

Operating Weight	35800 kg	78950 lb
Note	Operating weight includes full fuel tank, 75 kg (165 lb) operator and a 2000 kg (4,410 lb) grapple. Weight varies depending on configuration.

Maximum Reach	14080 mm	46.2 ft
Boom	MH 8.5 m (27'11")
Stick	6.4 m (21'0") Drop Nose
Maximum Height	15470 mm	50.8 ft
Maximum Dump Height	4670 mm	15.3 ft
Maximum Depth	4990 mm	16.4 ft
Boom Pin Height	10750 mm	35.3 ft

Maximum Travel Speed	18 km/h	11.2 mile/h
Drawbar Pull	145 kN	32597 ft·lbf
Maximum Gradeability	45%

Maximum Pressure - Implements	35000 kPa	5076 psi
Maximum Pressure - Swing	28400 kPa	4119 psi
Maximum Pressure - Travel	35000 kPa	5076 psi

Swing Speed	7 r/min	7 r/min
Maximum Swing Torque	82 kN·m	60680 lbf·ft

Fuel Tank Capacity	474 l	125.2 gal (US)
Cooling System	25 l	6.6 gal (US)
Engine Oil	25 l	6.6 gal (US)
Rear Axle - Housing (Differential)	19.5 l	5.2 gal (US)
Final Drive	2.2 l	0.6 gal (US)
Powershift Transmission	3 l	0.8 gal (US)
Hydraulic System - Including Tank	301 l	79.5 gal (US)
Hydraulic Tank	147 l	38.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank	41 l	10.8 gal (US)

Boom	MH 8.5 m (27'11")
Stick	6.4 m (21'0") Drop Nose
Shipping Length	11860 mm	38.9 ft
Machine Length	5785 mm	19 ft
Tail Swing Radius	3000 mm	9.8 ft
Counterweight Clearance	1465 mm	4.8 ft
Cab Height- Lowered	3500 mm	11.5 ft
Cab Height- Lowered with FOGS	3550 mm	11.6 ft
Cab Height-Raised	6095 mm	20 ft
Cab Height- Raised with FOGS	6145 mm	20.2 ft
Wheel Base	3200 mm	10.5 ft
Shipping Width	3000 mm	9.8 ft
Ground Clearance	249 mm	0.8 ft
Undercarriage Length	5781 mm	19 ft

Detalle Productos Cat

MH3032 Wheel Material Handler

High Performance

Unmatched Versatility

Ergonomic Comfort

Latest Features

High Performance

Take the Guesswork Out of Managing Your Equipment

Work in Comfort

Reliable, Durable, and Versatile

Maintenance

Safety Features

Sustainability

Engine

Weights

Working Ranges

Transmission

Hydraulic System

Swing Mechanism

Service Refill Capacities

Dimensions

You might also be interested in:

MH3022

MH3024

MH3026

MH3040

MH3050 - Tier 4 / Stage V

Compatible products:

Cat 2D E-fence for Excavators

CTV15-1000 Clamshell Grapple

CTV15-1200 Clamshell Grapple

CTV15-1500 Clamshell Grapple

CTV15-1700 Clamshell Grapple

CTV15-1900-BOCE Clamshell Grapple

CTV15-1900 Clamshell Grapple

CTV15-2300 Clamshell Grapple

CTV20-1300 Clamshell Grapple

CTV20-1500-BOCE Clamshell Grapple

CTV20-1500 Clamshell Grapple

CTV20-1700 Clamshell Grapple

CTV20-1900 Clamshell Grapple

CVP110

G317 GC Demolition & Sorting Grapple

G317 GC Demolition & Sorting Grapple

G318 Demolition & Sorting Grapple

G318 Demolition & Sorting Grapple

G318 Demolition & Sorting Grapple

G318 WH Demolition & Sorting Grapple

Other categories of Equipos:

Mini Excavators

Small Excavators

Magni fixed telehandlers

Compact Wheel Loaders

Medium Excavators

Magni rotating telehandlers

Small Wheel Loaders

Large Excavators

Magni heavy duty telehandlers

Medium Wheel Loaders

Demolition Excavators

Large Wheel Loaders

Wheel Excavators

Chippers

Forestry forwarders

Underground Mining Equipment

Mobile stockpillers

Compactors

Landfill Compactors

Vibratory Soil Compactors

Soil Compactors

Screens

Scalper screens

Mobile Trommel screens

Underground Mining Trucks

Articulated Trucks

Mining Trucks

Off-Highway Trucks

Underground mining equipment

Long Reach Excavation

Excavators