16 Motor Grader

Units of measurement :

Metric

Imperial

Base Power (1st Gear) - Net

216 kW

Operating Weight - Typically Equipped

32411 kg

Blade Width

4.9 m

Availability

Purchase Rental Used

The Cat® 16 motor grader is built for mine operations and haul road construction. Its fuel-efficient design, robust build, and advanced technology deliver maximum uptime, lower costs, and superior productivity.

Easy Maintenance for More Uptime

Modular components allow quick maintenance without disturbing other parts. Cat® MineStar™ aligns service intervals for efficiency, while the adjustable circle drive cuts wear and service time.

Consistent Power for Maximum Productivity

The Cat® C13 engine delivers consistent power for sudden load spikes, while Variable Horsepower (VHP) optimizes performance across all gears. Eco mode maximizes fuel efficiency in real time, ideal for demanding mining operations.

Safe Access, Safe Operators

Equipped with grab handles, nonslip steps, and tie-off points for safe access to tandem walkways, plus optional platforms for fall protection. Dual access paths allow engine and cab entry from both sides for efficient maintenance.

RELIABILITY YOU CAN COUNT ON

PERFORMANCE AND PRODUCTIVITY

ENSURING A SAFE JOB SITE

TOP-TIER SERVICE AND SUPPORT

Reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance, maximizing availability.
Major components are modular, so most can be removed and reinstalled without disturbing other components for peak repair efficiency.
C13 engine has been optimized to be as efficient without compromising performance. Eco mode can be activated to control high engine idle speed and ensure the engine is performing as efficiently as possible, offering additional fuel savings.
Center shift section of the front frame is a heavy-duty steel casting improving stress distribution for enhanced durability.
Rear frame structure is lengthened providing easy access to components in the engine enclosure as well as improved machine balance.
Front axle steering cylinder enhances durability and hydraulic lines are routed to improve reliability.
Modular cooling package provides simple removal and installation of components on the cooling system reducing service time.
Engine enclosure doors provide complete access to the engine without any enclosure post.
Extended maintenance intervals reduce the number of touches and downtime.
Fluid monitoring systems help prevent critical components from damage when levels are low.
Information Display in cab shows service/maintenance concerns and diagnostic codes are logged.

16 Specalog.pdf Motor Grader Rig Out Catalog.pdf 16 Poster.pdf

Engine

Base Power (1st Gear) - Net	216 kW	290 hp
Engine Model	Cat® C13
Bore	130 mm	5.1 in
Stroke	157 mm	6.2 in
Speed at Rated Power	2,000 rpm
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	3711 m	12176 ft
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	1721 N·m	1270 lb/ft
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4)	1771 N·m	1306 lb/ft
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	1721 N·m	1270 lb/ft
Emissions (2)	Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards â€“ depending on emission standards of specific country
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4)	43%
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	39%
Standard - Ambient Capability	50 °C	122 °F
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	3954 m	12973 ft
VHP Range - Net - Metric	216-259 kW (294-353 hp)
Base Power (1st Gear) - Net - Metric	216 kW	294 hp
Standard - Fan Speed - Minimum	550 rpm
Standard - Fan Speed - Maximum	1,450 rpm
Emissions (3)	Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards â€“ depending on emission standards of specific country
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	39%
Emissions (1)	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
VHP Range - Net	216-259 kW (290-348 hp)
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4)	3810 m	12500 ft
Optimized VHP Range - Net	216-259 kW (290-348 hp)
Displacement	12.5 l	763 in³
Number of Cylinders	6

Weights

Moldboard

Service Refill

Power Train

Hydraulic System

Blade Range

Operating Specifications

Frame

Tandems

Ripper

Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*

Dimensions (Approximate)

Standards

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric

Optional Tire Arrangements

Air Conditioning System

Compatible products:

Other categories of Equipos:

360º Interior
360º Exterior

16 Motor Grader

Blade Width	4.9 m	16 ft
Arc Radius	413 mm	16.3 in
Throat Clearance	126 mm	5 in
Thickness	25 mm	1 in
End Bit - Width	152 mm	6 in
Blade Pull* - Base GVW	18615 kg	41039 lb
Cutting Edge Width	203 mm	8 in
Cutting Edge Thickness	25 mm	1 in
Down Force - Maximum GVW	19895 kg	43861 lb
Height	787 mm	31 in
Width	4.9 m	16 ft
Down Force - Base GVW	13945 kg	30743 lb
Blade Pull* - Maximum GVW	23985 kg	52878 lb
End Bit - Thickness	19 mm	0.75 in
Note	*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

Fuel Capacity	496 l	131 gal (US)
Cooling System	70 l	18.5 gal (US)
DEF Tank	16 l	4.2 gal (US)
Hydraulic System - Total	146 l	38.6 gal (US)
Hydraulic System - Tank	70 l	18.5 gal (US)
Engine Oil	36 l	9.5 gal (US)
Transmission - Differential - Final Drives	98.5 l	34 gal (US)
Tandem Housing - Each	129 l	34 gal (US)
Front Wheel Spindle Bearing Housing	0.9 l	0.24 gal (US)
Circle Drive Housing	10 l	2.6 gal (US)

Forward/Reverse Gears	8 Forward/6 Reverse
Transmission	Direct drive, power shift, countershaft
Brakes - Dynamic Brake Torque per Wheel	36701 N·m	27069.27 lb/ft
Brakes - Secondary	Oil-actuated, oil-disc
Brakes - Service	Oil-actuated, oil disc
Brakes - Parking	Spring applied, hydraulically released

Circuit Type	Electro-hydraulic load sensing, closed center
Pump Type	Variable piston
Maximum System Pressure	24750 kPa	3590 psi
Standby Pressure	5900 kPa	856 psi
Pump Output*	280 L/min	74 gpm
Note	*Pump output measured at 2,150 rpm.

Maximum Blade Position Angle	65°
Maximum Lift Above Ground	400 mm	15.7 in
Maximum Depth of Cut	470 mm	18.5 in
Maximum Shoulder Reach Outside of Tires - Right	2311 mm	91 in
Moldboard Sideshift - Left	740 mm	29.1 in
Circle Centershift - Right	560 mm	22 in
Circle Centershift - Left	690 mm	27.2 in
Moldboard Sideshift - Right	790 mm	31.1 in
Maximum Shoulder Reach Outside of Tires - Left	2311 mm	91 in
Blade Tip Range - Forward	40°
Blade Tip Range - Backward	5°

Steering Range - Left/Right	47.5°
Forward - 6th	25.8 km/h	16 mile/h
Forward - 4th	12.3 km/h	7.6 mile/h
Forward - 5th	19 km/h	11.8 mile/h
Turning Radius - Outside Front Tires	9.3 m	30.5 ft
Forward - 7th	35.5 km/h	22 mile/h
Top Speed - Forward	51.7 km/h	32.1 mile/h
Forward - 3rd	8.9 km/h	5.5 mile/h
Reverse - 6th	40.8 km/h	25.3 mile/h
Reverse - 5th	28 km/h	17.4 mile/h
Reverse - 2nd	6.6 km/h	4.1 mile/h
Reverse - 3rd	9.7 km/h	6 mile/h
Forward - 8th	51.7 km/h	32.1 mile/h
Reverse - 1st	3.6 km/h	2.2 mile/h
Forward - 1st	4.5 km/h	2.8 mile/h
Top Speed - Reverse	40.8 km/h	25.4 mile/h
Forward - 2nd	6.1 km/h	3.8 mile/h
Reverse - 4th	15 km/h	9.3 mile/h
Articulation Angle - Left/Right	20Â°
Note	Calculated with no slip and 23.5 R25 L-3 tires.

Front Frame Structure - Height	460 mm	18.1 in
Front Frame Structure - Width	356 mm	14 in
Drawbar - Width	76 mm	3 in
Drawbar - Height	203 mm	8 in
Front Axle - Total Oscillation per Side	35°
Circle - Diameter	1822 mm	71.7 in
Circle - Blade Beam Thickness	50 mm	2 in
Front Frame Structure - Thickness	14 mm	0.6 in
Front Axle - Wheel Lean	18° Left/17° Right
Front Axle - Height to Center	670 mm	26.4 in

Tandem Oscillation - Front Up	15°
Sidewall Thickness - Outer	22 mm	0.9 in
Sidewall Thickness - Inner	22 mm	0.9 in
Tandem Oscillation - Front Down	25°
Height	648 mm	25.5 in
Width	236 mm	9.3 in
Drive Chain Pitch	63.5 mm	2.5 in
Wheel Axle Spacing	1841 mm	72.5 in

Ripping Depth - Maximum	452 mm	17.8 in
Shank Holder Spacing - Minimum	445 mm	17.5 in
Shank Holder Spacing - Maximum	500 mm	20 in
Ripper Shank Holders	7
Penetration Force	13749 kg	30311 lb
Pry-Out Force	19822 kg	43700 lb
Machine Length Increase, Beam Raised	1610 mm	63.4 in

Gross Vehicle Weight - Maximum Tested - Total	38500 kg	84877 lb
Gross Vehicle Weight - Base** - Total	28816 kg	63528 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle	23678 kg	52201 lb
Gross Vehicle Weight - Typically Equipped - Total	32411 kg	71454 lb
Gross Vehicle Weight - Maximum Tested - Front Axle	11850 kg	26125 lb
Gross Vehicle Weight - Typically Equipped - Front Axle	8733 kg	19253 lb
Gross Vehicle Weight - Maximum Tested - Rear Axle	26650 kg	58753 lb
Gross Vehicle Weight - Base** - Front Axle	8134 kg	17932 lb
Gross Vehicle Weight - Base** - Rear Axle	20682 kg	45596 lb
Note (1)	*For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
Note (2)	**Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.

Ground Clearance - Rear Axle	396 mm	15.6 in
Length - Counterweight to Ripper	12051 mm	474.4 in
Length - Front Axle to Moldboard	3066 mm	120.7 in
Length - Front Axle to Mid Tandem	7365 mm	290 in
Height - Top of Cylinders	3088 mm	121.6 in
Width - Tire Center Lines	2703 mm	106.4 in
Width - Outside Rear Tires	3411 mm	134.3 in
Length - Between Tandem Axles	1841 mm	72.5 in
Height - Top of Cab	3719 mm	146.4 in
Width - Outside Front Tires	3411 mm	134.3 in
Height - Front Axle Center	733 mm	28.9 in
Length - Front Tire to Rear of Machine - Including Tow Hitch	10593 mm	417 in
Height - Exhaust Stack	3557 mm	140 in

Steering	ISO 5010:2007
Brakes	ISO 3450:2011
Sound	ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
ROPS/FOPS	ISO 3471:2008/ISO 3449:2005
Note (1)	The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system.
Note (2)	The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system.

Gear - Reverse 3rd-6th	222 kW	298 hp
Gear - Forward 8th	259 kW	348 hp
Gear - Forward 3rd	222 kW	298 hp
Gear - Forward 6th	239 kW	320 hp
Gear - Forward 5th	232 kW	311 hp
Gear - Reverse 1st	216 kW	290 hp
Gear - Reverse 2nd	216 kW	290 hp
Gear - Forward 4th	227 kW	304 hp
Gear - Forward 7th	244 kW	328 hp
Gear - Forward 1st	216 kW	290 hp
Gear - Forward 2nd	216 kW	290 hp

Gear - Forward 4th	227 kW	309 hp
Gear - Reverse 1st	216 kW	294 hp
Gear - Forward 3rd	222 kW	302 hp
Gear - Reverse 3rd-6th	222 kW	302 hp
Gear - Reverse 2nd	216 kW	294 hp
Gear - Forward 7th	244 kW	332 hp
Gear - Forward 6th	239 kW	325 hp
Gear - Forward 8th	259 kW	353 hp
Gear - Forward 1st	216 kW	294 hp
Gear - Forward 5th	232 kW	315 hp
Gear - Forward 2nd	216 kW	294 hp

Wheel Group - 19.5×25 MP (1)	Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (2)	Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (3)	Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (4)	Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (5)	Tires: 23.5R25 Michelin XLDD 2 Star L5

Detalle Productos Cat

16 Motor Grader

Easy Maintenance for More Uptime

Consistent Power for Maximum Productivity

Safe Access, Safe Operators

RELIABILITY YOU CAN COUNT ON

PERFORMANCE AND PRODUCTIVITY

ENSURING A SAFE JOB SITE

TOP-TIER SERVICE AND SUPPORT

Engine

Weights

Moldboard

Service Refill

Power Train

Hydraulic System

Blade Range

Operating Specifications

Frame

Tandems

Ripper

Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*

Dimensions (Approximate)

Standards

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric

Optional Tire Arrangements

Air Conditioning System

You might also be interested in:

120 / 120 AWD

14

150 / 150 AWD

18

24

Compatible products:

Cat® Detect with Smart Camera

Cat® Detect with Smart Camera

Cat® Detect with Surround Cameras

Cat® Detect with Surround Cameras

Cat® Detect with Surround Cameras

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Cat Grade with 3D for Motor Graders

Other categories of Equipos:

Mini Excavators

Small Excavators

Magni fixed telehandlers

Compact Wheel Loaders

Medium Excavators

Magni rotating telehandlers

Small Wheel Loaders

Large Excavators

Magni heavy duty telehandlers

Medium Wheel Loaders

Demolition Excavators

Manipuladoras telescópicas agrícolas

Large Wheel Loaders

Wheel Excavators

Chippers

Forestry forwarders

Underground Mining Equipment

Mobile stockpillers

Compactors

Landfill Compactors

Vibratory Soil Compactors

Soil Compactors

Screens

Scalper screens

Mobile Trommel screens