Esta web utiliza 'cookies' propias y de terceros para ofrecerte una mejor experiencia y servicio. Al navegar o utilizar nuestros servicios, aceptas el uso que hacemos de ellas. Puedes cambiar la configuración de 'cookies' en cualquier momento.

Seleccionar categoría

920 Compact Wheel Loader

Solicitar información sobre este producto

Descripción

The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Solicitar presupuesto

Foto del 920 Compact Wheel Loader
Unidades:
Engine
Maximum Gross Power121HP90kW
Operating Weight21742lb9865kg
Bucket Capacities1.3-1.9 m? (1.7-2.5 yd?)
Bore3.86in98mm
Stroke4.72in120mm
Displacement220in?3.6l
Transmission0.8gal (US)3.2l
ROPSISO 3471:2008
FOPSEN ISO 3449:2008 (ISO 3449:2005)
Note (2)In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)Other tire choices are available. Contact your Cat dealer for details.
Standard Size17.5 R25 L2 XTLA
Other Choices Include17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Note (4)*The measurements were conducted with the cab doors and windows closed.
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
FrontFixed; Locking differential (standard)
RearOscillating ?11 degrees; Locking differential (standard)
Forward and Reverse - Speed Range 1*6.3mile/h10km/h
Forward and Reverse - Speed Range 2*12.5mile/h20km/h
Forward and Reverse - Speed Range 325mile/h40km/h
Note*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
NoteDEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Hydraulic Tank14.5gal (US)55l
Fuel Tank43.6gal (US)165l
Axles - Front4.5gal (US)17l
Hydraulic System - Including Tank25.9gal (US)98l
Cooling System5.7gal (US)21.5l
Axles - Rear4.5gal (US)17l
Diesel Exhaust Fluid (DEF) Tank4.8gal (US)18l
Engine Crankcase2.6gal (US)10l
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High40gal/min150l/min
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift4.8s4.8s
Hydraulic Cycle Time - Dump, at Maximum Reach1.8s1.8s
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow25gal/min95l/min
Hydraulic Cycle Time - Rackback2.2s2.2s
Hydraulic Cycle Time - Total Cycle Time11.5s11.5s
Maximum Working Pressure - Implement Pump4061psi28000kPa
NoteAll cycle times listed are with cylinder snubbing turned off.
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level2.7s2.7s
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure4641psi32000kPa
Maximum Flow - Implement Pump43.6gal/min165l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard25gal/min95l/min
Relief Pressure - Tilt Cylinder4641psi32000kPa
Maximum Flow - Steering Pump21.7gal/min82l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.4turns3.4turns
Steering Articulation Angle - Each Direction40°40°
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed2.3s2.3s
Maximum Working Pressure - Steering Pump3190psi22000kPa
Bucket Capacities - Light Material2.5-3.5 m? (3.3-4.6 yd?)
Bucket Capacities - General Purpose1.3-1.9 m? (1.7-2.5 yd?)
Maximum Net Torque - SAE J1349366ft?lbf496N?m
Maximum Net Torque - ISO 9249363ft?lbf493N?m
Maximum Gross Torque - ISO 14396369ft?lbf500N?m
Rated Net Power - ISO 9249118HP88kW
Rated Net Power - ISO 9249 (DIN)120HP88kW
Maximum Gross Power - SAE J1995123HP92kW
Engine ModelCat C3.6
Maximum Gross Torque - SAE J1995372ft?lbf505N?m
Maximum Gross Power - ISO 14396121HP90kW
Maximum Gross Power - ISO 14396 (DIN)122HP90kW
Rated Net Power - SAE J1349120HP90kW
Rated Net Power - Rated Engine Speed2200r/min2200r/min
NoteNet power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
EmissionsEngine meets Tier 4 Final/Stage V emission standards.
Maximum Gross Power - Maximum Engine Speed2350r/min2350r/min