Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
@@@
@@@
@@@
@@@
@@@
@@@
@@@
@@@
@@@Manipulador de bloques
@@@
|
@@@
|
@@@
|
@@@
|
@@@
|
@@@
|
@@@
|
@@@
|
@@@Manipulador de bloques
|
Rack Back | 4.5s4.5s |
Raise | 9s9s |
Dump | 3.5s3.5s |
Lower | 5.2s5.2s |
Lower Float Down | 4.3s4.3s |
Total Hydraulic Cycle Time | 21.3s21.3s |
Net Power | 373HP278kW |
Engine Model | C15 Cat® |
Emissions | Tier 4 Final/Stage V, or China Nonroad Stage III and Brazil MAR-1 equivalent to Tier 3 and Stage IIIA |
Gross Power - ISO 14396 | 449HP335kW |
Peak Power Speed - 1,600 rpm - SAE J1995 | 456HP340kW |
Peak Power Speed - 1,600 rpm - SAE J1995 (DIN) | 462HP340kW |
Peak Power Speed - 1,600 rpm - ISO 14396 | 449HP335kW |
Peak Power Speed - 1,600 rpm - ISO 14396 (DIN) | 455HP335kW |
Rated Speed - 2,000 rpm - EEC 80/1269 | 373HP278kW |
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) | 378HP278kW |
Rated Speed - 2,000 rpm - ISO 9249 | 373HP278kW |
Rated Speed - 2,000 rpm - ISO 9249 (DIN) | 378HP278kW |
Rated Speed - 2,000 rpm - SAE J1349 | 373HP278kW |
Rated Speed - 2,000 rpm - SAE J1349 (DIN) | 378HP278kW |
Bore | 5.4in137mm |
Stroke | 6.75in171.5mm |
Displacement | 927in²15.2l |
Peak Torque - 1,200 rpm - SAE J1995 | 1778lb/ft2411N·m |
Torque Rise | 16% |
Brakes | ISO 3450:2011 |
ISO 5010:2007 - Steering System - Circuit | Load Sense |
ISO 5010:2007 - Steering System - Pump | Piston, variable displacement |
ISO 5010:2007 - Maximum Flow at 1,400 rpm | 52gal/min200l/min |
ISO 5010:2007 - Steering Cutoff Pressure | 4000psi27600kPa |
ISO 5010:2007 - Total Steering Angle | 70° |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
Ground to Top of ROPS | 13.5ft4100mm |
Ground to Top of Exhaust Stacks | 13.3ft4060mm |
Ground to Top of Hood | 10.7ft3270mm |
Ground to Center of Front Axle | 3.2ft978mm |
Ground to Fuel Tank Clearance | 2.3ft691mm |
Ground to Lower Hitch Clearance | 1.5ft459mm |
Reach - Maximum Lift | 7.4ft2248mm |
Clearance at Maximum Lift | 11.6ft3538mm |
B-Pin Height - Maximum Lift | 17.6ft5371mm |
Maximum Overall Height - Bucket Raised | 23.9ft7276mm |
Rear Axle - Centerline to Bumper | 10.3ft3132mm |
Wheel Base | 12.5ft3810mm |
Maximum Overall Length | 38ft11591mm |
Front Axle Centerline to Bucket Tip | 15.3ft4649mm |
Note |
|
Operator Sound Level (ISO 6396) | 72dB(A)72dB(A) |
Machine Sound Level (ISO 6395) | 110dB(A)110dB(A) |
Note |
|
Fuel Tank | 141gal (US)535l |
Fuel Tank - Short Lift | 127gal (US)481l |
Cooling Systems | 26gal (US)100l |
Crankcase | 9gal (US)34l |
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only) | 6gal (US)23l |
Transmission | 20gal (US)75l |
Axle Oil - Differentials and Final Drives - Front | 49gal (US)186l |
Axle Oil - Differentials and Final Drives - Rear | 45gal (US)170l |
Hydraulic System Factory Fill | 87gal (US)330l |
Hydraulic System - Tank Only | 34gal (US)130l |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | ±12.5° |
Oscillation Angle - Chain Arrangement | ±8.5° |
Bucket Capacities | 5-10,3 m³ (6,5-13,5 yd.³) |
Operator Sound Level (ISO 6396) | 72dB(A)72dB(A) |
Machine Sound Level (ISO 6395) | 112dB(A)112dB(A) |
Note |
|
Transmission Type | Cat-Planeten-Lastschaltgetriebe |
Forward - 1 | 5mile/h7.3km/h |
Forward - 2 | 8mile/h12.2km/h |
Direct Drive - Forward 2 | 8mile/h12.7km/h |
Direct Drive - Forward 3 | 14mile/h22km/h |
Direct Drive - Forward 4 | 24mile/h39km/h |
Reverse - 1 | 5mile/h7.6km/h |
Reverse - 2 | 8mile/h13.6km/h |
Direct Drive - Reverse 2 | 9mile/h14.1km/h |
Direct Drive - Reverse 3 | 16mile/h25km/h |
Direct Drive - Reverse 4 | 25.4mile/h40.8km/h |
Ground to Top of ROPS | 13.5ft4100mm |
Ground to Top of Exhaust Stacks | 13.3ft4060mm |
Ground to Top of Hood | 10.7ft3270mm |
Ground to Center of Front Axle | 3.2ft978mm |
Ground to Fuel Tank Clearance | 2.3ft691mm |
Ground to Lower Hitch Clearance | 1.5ft459mm |
Reach - Maximum Lift | 7.1ft2175mm |
Clearance at Maximum Lift | 10.1ft3079mm |
B-Pin Height - Maximum Lift | 16.1ft4912mm |
Maximum Overall Height - Bucket Raised | 22.4ft6817mm |
Rear Axle - Centerline to Bumper | 10.3ft3132mm |
Wheel Base | 12.5ft3810mm |
Maximum Overall Length | 36.6ft11143mm |
Front Axle Centerline to Bucket Tip | 13.8ft4201mm |
Note |
|
Operating Weight | 98806lb44818kg |
Operating Weight - Standard | 97785lb44355kg |
Operating Weight - High Lift | 104005lb47175kg |
Rated Payload - Quarry Face | 11ton (US)10t |
Rated Payload - Loose Material (Standard) | 14ton (US)12.7t |
Rated Payload - Loose Material (High Lift) | 12.1ton (US)11t |
Rated Payload - Standard (Quarry Face) | 11ton (US)10t |
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | 14ton (US)12.7t |
Rated Payload - High Lift (Quarry Face) | 11ton (US)10t |
Rated Payload - High Lift (Low to Moderate Digging Resistance) | 12.1ton (US)11t |
Bucket Capacity Range | 5-10,3 m³ (6,5-13,5 yd.³) |
Cat Truck Match - Standard | 770/735/740/745 |
Cat Truck Match - High Lift | 772/773 |
Lift/Tilt System - Circuit | Load Sense |
Lift/Tilt System - Pump | 2 × 110 cc variable displacement |
Maximum Flow at 2,165 rpm | 123gal/min470l/min |
Relief Valve Setting - Lift/Tilt | 4050psi27900kPa |
Lift Cylinder - Bore | 7.5in190mm |
Lift Cylinder - Stroke | 45in1138mm |
Tilt Cylinder - Bore | 6.7in170mm |
Tilt Cylinder - Stroke | 28.4in722mm |